|
With all of the available design software being more and more accessible, you may decide to create you own documents or materials. We are not against customers doing so, however if you choose to set-up and design your own documents to be printed, there are a few things we need in order to process your documents.
Please take a moment to download and review the following documents to insure we process your print job with the best quality in mind. Not following our guidelines may produce undesirable results that we won't be responsible for if not followed. Please download each of the documents below: 
|
 Send us your document.
If your document is ready to print. Upload it by completing the form on our uploader page. Please make sure your document conforms to the guidelines specified in our Document/Artwork Requirements Flyer and you have examined our Document Set-Up Diagram below. Please only upload .PDF files.
|
||||
"Bleed" Set-Up Diagram
Please refer to the photos to help you set-up your document to print with Nebraska PrintWorks. This is specially important if you wish to have your document "bleed" or print to the edge. The images below are of a sample document. The FINISHED document size will be 8.5""x5.5"(right photo) the submitted document to NPW will need to be 8.75"x5.75". (Sizes are only for illustration.) It is larger because of the bleed room (1/8" on all for sides, 1/4" total increased size) needed to make it appear to print to the edge. Please call for a better explanation. Click here for a printable version of both images below.(Please note that the images on the printable version are reduced to aid in printing and illustration.
Before Trim.
This is what we need when you submit a file to us. Click picture to enlarge
|
Finished Product.
This is how it will look as a finished product. Notice the blue bleed line is trimmed off. Only the yellow trim line as well as the black copy line is visible. Click to enlarge.
|